The irrigation control for agricultural deep rooted crops.

View a graphic presentation

IrriSave agricaltural System

A wetting depth probe with 8 sensors located at depths 5 to 50 cm. at 6cm intervals.The irrigation control box is located close to the probe and attached to it by wire. It manages the program of scanning the sensors along the probe and determines the frequency of scanning depending whether the scan is during the irrigation (every 2 min.), the drainage (every 5min). or the drying stage (every 30min).

It receives the sensor scan values and with the help of intelligent algorithms makes decisions to open or close the solenoid valve.

The control box can control one, AC or DC, solenoid valves, operating as a stand alone controller. In addition it can function as a local controller in close cooperation with most commercial irrigation computers.

There is no need to calibrate the probe for local conditions of soil, plant or atmospheric parameters.



Features

  • Final Wetted Depth as the control objective, rather than water quantity.
  • Compatible with existing controllers.
  • Intelligent feedback learning system that controls the time to start and stop irrigation.
  • Connectable to a PC.
  • Battery powered.
  • Modular.
  • Low cost


Advantages

  • Saves 30-50% of irrigation water
  • Maintenance agrochemicals in root zone
  • Prevents groundwater contamination
  • Simple installation and operation
  • Low maintenance
  • Suitable for all soil types
  • No calibration required
  • Autonomous operation



Applications


All types of irrigation systems including:

  • Vineyards
  • Field crops
  • Orchards

Compatible with all methods of irrigation:

  • Sprinkler
  • Micro
  • Drip

 


 

 
Powered by Artvision | Truppo Websites